remove

  1. Z

    Changing Climate Control Colour/Replacing broken LED | S15

    Hello and welcome to another new Tutorial! This can only be done in the Jap Spec S15's, ADM ones may share bulbs, and process to remove is similar, so you can follow along too with discretion. For this tutorial, all you will need it a few Phillips head Screw Drivers and the appropriate...
  2. B

    hello

    hello all I'm sean from Glasgow just got my first s15 few weeks ago so be prepared to be bombarded with stupid questions infact while your here can someone tell me could I just remove my factory boost gauge sensor and plug my defi one into it instead of plumbing it in elsewhere? thanks in...
  3. JDM_virgin

    Cam Cover Breathers

    I have a spare cam cover that i want to get powder coated and have the pipes fitted with AN connectors. Does anyone know how you remove the existing connector bits on the cam cover from the breathers. the two brass bits or whatever they're made of
  4. N80Jamie

    Titanium exhaust - work needed

    I'm looking to get hold of a contact that could possibly rectify my issue with a titanium exhaust. The baffle inside the centre silencer has come loose and is subsequently rattling. I presume the only way of getting rid of this is to cut it open, remove the baffle and weld back together... Can...
  5. Surfing Boris

    Cornish Body Shops

    Hi Guys, I am trying to find a good company in the South West that will de-lock, remove all badges, and remove the original spoiler from an S15 boot. I want to get a couple of quotes from decent garages. Does anybody know of anywhere in the SW that can do a good job and comes reccommended please?
  6. Jaydej

    Fitting harness without bar or roll ca

    Hey all I've fitted some harness eyes in my car they are just behind the pillar support under the back seat. I've been told that it isn't the best location. What have you guys done? And I don't really want to remove tank please helppp
  7. C

    S15 ground up build, with added patience

    Hi everyone so here's my rb25 s15.<br><br>still undecided wether to keep the rb or change to a sr20 <br><br>so so here's the shell which Huxley motorsport have done some bay welding now got to remove all the undersealing and restart it all. That'll take some time so will leave you chaps with...
  8. Jaydej

    WAX on Plastics :S

    Hey guys the other day I polished and waxed my car and even with tape managed to get some on the plastics around the windows anyone got any tips on how to remove it?
  9. shib

    Wind Deflector Removal

    My passenger side wind deflector is missing a clip and damaged on one of the corners so I'm going to remove them both. What's the best way to remove these? I'm concerned about the trim behind them, can these be replaced if it's not looking too healthy?
  10. Nickichi

    Main Crankshaft pully

    Heya I probably know the answer to this but i thought i would try here first (and boost my count lol, been a while) I've been working on the front of the car trying to remove rust that has built up since the awful winters we've had for a while in the UK and when I got to the pulley after...
  11. Sparky

    Aero spoiler brake light bulb

    Bulb packed in on Aero spoiler. Does the lens come off to replace the bulb, or do you have to remove the spoiler from the car to replace from the inside ?
  12. J

    Stunning black Spec-R vs. Detailing Jem

    I've been down to West London today to detail is very nice S15. The car was last detailed two years ago by another detailer who advised the owner the paint was thin, and how right he was, in some places there was barely 50 microns of paint, so a full correction wouldn't be possible. The plan...
  13. Parky

    New to S15s, question about diffs...

    Evening all, I'm picking up an S15 this weekend, and it has a locked diff. I think I'd be better off with an LSD as I have no intention of drifting it. I would ideally want to trade with someone who wants a locked diff but has an LSD. Just wondering how I can tell the make of the locked...
  14. J

    how do you remove dash vents

    Hey guys, I'm gonna fit my 60mm boost gauge to my air vent, my question is how the feck do you remove it, I already have one broken but there is no obvious way to remove it. cheers joey
  15. S

    Walbro fuel pimp fitting. Oops.

    Hi guys I've spent the day doing car things one of these being fitting a walbro fuel pump. Now while removing the hoses the no easy remove one broke on me. I'll try and get a pic to explain better. My question is can i just put the hose over the plastic that didn't snap and forget about it or do...
  16. S

    Bumper Removal?

    Hi guys I'm in the process of fitting my front mount intercooler and got a bit stumped on how to remove the bumper. I have removed the standard intercooler piping, under tray and arch liners. I have removed the screws from each side and the 5 push clips on top. Is that the lot? It still seems...
  17. J

    How to remove Interior?

    I'm looking to spray my interior, I was wondering if there was a how to anywhere as to how to get the main part out? I'll be able to remove the centre console, just unsure on the part it goes onto that holds the glove box etc.
  18. 2fst4u

    How to remove grey/silver trim on stock steering wheel

    Quick uncommon question: Does anyone know how to remove those two silver trim bits on the stock steering wheel without snapping anything? Too poor to get a new wheel for now so gonna pimp this one out :)
  19. Tony

    fitting H-dev exhaust manifold.

    Hi guys! Bought a H-dev exhaust manifold, but I havent fitted It yet, Are they difficult to fit? haven't really done this before, All tips and trix are welcome, I was planning to remove the bolts by the turboflange first.. and then remove the bolts on the flange thats on engine side, and just...
  20. Dan H

    Steering wheel swap guide

    ADMIN EDIT: S15OC is NOT responsible if you cause any damage to your car or yourself. Removing an airbag can be dangerous. Just thought I'd do a little write up on changing the steering wheel, seeing as I've just done mine. First thing to do is disconnect the battery. Safety first and all...
Top