metal

  1. TheSnowfury

    WTB: Re-body Project: need S15 shell

    Hi folks, looking to completely rebuild my S15 following a recent accident. Anyone have an S15 shell up for grabs? Doesn’t matter if spec r or s as I’ll be seam welding it. Can cope with minor dents but must be straight. Once metal work done will be performing a bare metal respray in...
  2. A

    FS: Boot lid. Bare metal

    Anyone interested in a boot lid? It's been shot blasted back to bare metal. So has surface rust but nothing major. Has indentations across the top surface which were previously filled but beyond my diy expertise to fix. Has holes for the oem spoiler. Would suit a drift/track car I would say...
  3. T

    Turbo setup...Metal lock nuts or use Lock Tabs

    Need some feedback here guys as my turbo is coming out for all new gaskets and braided lines at the weekend.should i just get some OEM Lock tabs or are those driftworks metal lock nuts a better idea the only mods done to engine will be elbow and downpipe so more or less standard set up.Im...
  4. R

    Metal Intake Pipe

    Hi guys, Looking to get a metal intake pipe for my S15, noticed a few people here using them. Am I right in assuming most people just get them fabricated? Or is there an actual supplier? Any help would be great, Thanks :)
  5. M

    WTB: S15 stereo mounting brackets

    Hi guys I'm after a set of the metal brackets that the stereo screws onto to mount ... Anyone got some ??
  6. dave_t

    Front Hub Nuts (32mm) Who sell's them???

    Just replaced both front wheel bearings/hubs and need to replace the 32mm hub nuts. Nissan said it would be a 3 week wait! Anyone know where to pick some up? Also, the metal hub 'cap' that acts as a weather seal could do with renewing too if they are available
  7. MATT BOON

    Interior question

    Has anyone ever taken the covers off their seats? Mine are damp/ mouldy and I need to get them off. So far it looks like a ballache!!! All these metal clips look like a pain to get off and on again Help?
  8. G

    WTB: s15 radio brackets

    has anyone got some? or has someone got some they could draw around on paper so i can just copy them into metal.
  9. N

    WTB: S15 metal bonnet

    Looking for a metal s15 bonnet preferably red or black but anything considered, I'm living in Ireland so even uk and postage I'd be willing to consider. No ridiculous prices please
  10. N

    FS: s15 bits and bobs

    Few s15 bits and bobs: Swift 060's and 080's x 2 lowering springs €40 (think for s15 or levin cant remember) Ripspeed Pedals with screws (NEW) €15 Blue wheel nuts (20pk with locking key) 1.25 x 12 thread €50 (to suit s15) S15 Rear Lights as new (no scratches) €80 Idle Control Valve...
  11. pegliobaglio

    Helicoil kits

    Right chaps, as some of you may know I have a little problem. Fitted my Mani a few weeks ago, had a little water leak so removed it all and when I put it all back together the oil line ( block end) wouldn't tighten up it screws in but won't go tight if you get what I mean? Seems the thread in...
  12. JaseYpk

    HOW TO: Strip down an S15 Headlight!

    The method I used here caused no clips to snap, no plastics to melt, and generally, no damage AT ALL to the headlight unit. :) First, preheat oven to 90'c and arrange the shelves so that you can squeeze your headlight in. I used tin foil to prevent tray imprints on my headlight, and also to...
  13. JaseYpk

    WTB: Front Fenders (OEM METAL!)

    Need a pair of front fenders. not in a major hurry as the rust has already put a hole through my current one, so it cant look much worse than it already does. hahaha. METAL ONES ONLY please. I dont do fibreglass. pewter would be nice, but i'll settle with any colour. Cheers Jase :p
  14. Fasthands

    Fitting HID's guide..

    Right chap's I have done the search and only found a post about fitting HID'S to S15 headlights and people asking if it can de done.. Well I did it yesterday and took some pic's to help anyone who may want to do it themselves. Parts needed, Pop revets, X2 Some strips of metal needs to be quite...
  15. J

    still got a electrical problem :(

    hi, basically whenever i put my indicator on all the hazards flash and the alarm goes off. i also cant set the alarm or use the remote i have to lock and unlock the car wiht the key. plus i cant use the normal standard key with the black box think at the top. i have to use the plain metal key...
  16. N

    Tomei Metal head gasket SR20DET Brand new

    Tomei metal head gasket SR20DET 88.0-1.5mm Location-Malaysia Price-RM1100 Nakamaproshop Kinson mobile=+60164117720
  17. D

    WTB: OEM metal bonnet.

    OEM metal bonnet needed. Will pay £120 and collect if I'm near enough :) Only one issue, I need it fast! My car is going in for paint on the 30th... Cheers guys.
  18. TriniGT

    Need Someone with Nissan FAST

    Need someone with Nissan FAST to verify these part numbers with pictures please, 80820-85F10 RH 80821-85F10 LH 76872-85F00 RH 76873-85F00 LH 82328-92F00 RH 82329-92F00 LH Basicaly, I am looking for some trim parts for my S15. Looking for the outer door trim that sits on the top of the metal...
  19. B

    which colour would you choose?

    If you were going to choose between 2 identical s15s, one snow white and one gun metal grey, which would you choose?
  20. J

    what bph should i be getting with this setup??

    greddy t518z turbo z32 afm 555cc inj tomei cams manifold elbow downpipe boost controller 1.2mm metal head gasket uprated fuel pump what bhp should i hit with these mods
Top