job

  1. S

    Clutch help

    Guys bit of help please my clutch is on it's way out. It's a Spec-R and only has induction kit and turbo back. I'm not planning on doing any other mods for more power etc. Can an anybody link me to a reasonably priced clutch kit that they've had any experience with that'll do the job...
  2. T

    My old wheels refurbished

    I bought myself a set of NISMO lmgt2 alloys for my s13 before I had my 15, but never got around to fitted them, but once I had my s15 I decided to fit them. When I bought them they were in their original finish but in bad condition, I drove on them like this for a few years before getting them...
  3. E

    Anyone have a guide to changing the vvt sprocket?

    Just looking to see if anyone can give me a guise to changing the vvt sprocket?Doesnt look like a big or difficult job just is there anything I should look out for.?thanks
  4. Jaydej

    Belts and bearings

    i sometimes get the odd sqeeky noise from the best, i can get a set of belts no problem, but i just wanted to know what bearing are common to go. or need to be changed dont want to be doing the job twice
  5. R-Spec

    FS: S15 Rear Camber arms (Apex)

    Recently did mine and then found another pair at the back of the cupboard!! Seems I bought 'stock' last year and completely forgot about it when I came to do the job and bought another set. Rose Jointed. New, never used. £90 inc. P&P Also have a pair of front tension rods... need to check a price
  6. Jordan

    FS: Short Steering boss - unbranded.

    Used this for a while now got a works bell one. Comes without screws for wheel fitting. Tried to drill holes in the back for the indicator cancel but didnt get much luck. You'll have to fabricate a little bracket for the horn if you want to run one. Dan H explains how to do this here...
  7. Jordan

    FS: Short Steering boss - unbranded.

    Used this for a while now got a works bell one. Comes without screws for wheel fitting. Tried to drill holes in the back for the indicator cancel but didnt get much luck. You'll have to fabricate a little bracket for the horn if you want to run one. Dan H explains how to do this here...
  8. T

    Bride seat material

    Anybody know where to buy bride material that is genuine not china-fake s**t as a retrim is on the cards for the next job :nod: links would be helpful thanks
  9. S15_SAM

    Replaced my clutch tonight! What a bastard that gearbox is!!!

    Just want to moan about how **** a job it is to do the clutch on a 6 speed! I stayed late after work, on my own, to replace my original unit with a ACT heavy duty organic clutch. There is just no room at the top when the box is loose I was huffing and puffing for ages and getting so...
  10. N80Jamie

    Couple Of Q's

    Couple Of Q's (Preventing bootlid from flying open) First of all im going to go ahead and remove the rear spoiler from the Silvia and just wanted to know how much this job should roughly cost? Also, will the whole bootlid have to resprayed when doing this job? Secondly, i'm wanting to wind my...
  11. Fruitbooter

    I've found the best lip for an S15

    The guy used to have a thread on here but he's no longer an active user. After lots of searching on the net, there are a few threads about this lip but nobody knows what it is! Could well be a custom job... Either way...it looks absolutely brilliant! :D
  12. R-Spec

    Excellent condition S15 for sale

    I'm not the first to see this I guess?.... "small dents / scratches stuff but nothing serious damage with a paint job , should take care of all that .":rotfl::rotfl::rotfl::rotfl::rotfl::rotfl: http://s168.photobucket.com/albums/u189/burhan143/?action=view&current=024-15.jpg
  13. S

    FS: S15 HKS hi-power exhaust

    This came with my S15, its in pretty good condition, it has had the second box removed and replaced with a piece of pipe, looks to be a good job: after £175ONO+ delivery can be collected from manchester or kent any questions just ask
  14. S15AK

    paint question

    Anyone that knows anything about spraying/painting? I want to paint my stainless steel coil pack over, so dose anyone know what type of spray can would do the job? Thanks
  15. J

    oil leak

    have a small oil leak i think it might be the front crank shaft oil seal does anybody know is this an easy job that i can do myself or not and what is the best oil for the sr20 engine????
  16. S

    Huddersfield area --> South?

    Anybody coming from huddersfield area southbound over the next week? i need some parts collected and dropped either leisceter/pod/ or near london abviously the job pays :D
  17. S

    Recomended Painters

    Hey guys I was thinking about getting the paint touched up on my s15 as there are quite a few stone chips and i was wondering if anyone could recommend someone who is going to a do a good job. I would perfer it to be cheap but i can live with it if its a good job. I am in the north west of...
  18. LuPix_S15

    Uprated Gearbox Mount?

    Folks, Thinking about upgrading stock gearbox mount with this Driftworks item: http://www.driftworks.com/catalog/products/poly-gearbox-mount.html Has anyone done this? The reviews look good and I'm starting to look into anything that'll help make the car feel tight when drifting :) I'm...
  19. adz87kc

    Removing rear wiper

    Hey guys, i want to remove the rear wiper for a few reasons: 1: I never use it 2: the wiper blade i have is at the end of its days 3: it looks wank :nod: So is there a particular knack to do this job or can anyone point me toward an idiot proof guide/how do? Also, is this the best solution to...
  20. S

    Cam belt

    Hi. Am I right in thinking silvia sr engines are chain driven, and don't have cam belts? How often do tensioners need replacing, Is it a simple job? When if ever do the timing chains need replacing? Regards mike
Top