bolt

  1. D

    Nuts and bolt Kits

    Hi, are there any nuts and bolt kits available for an S15 Spec-R? I would like to have a good assortment of nuts and bolts in my garage, or would a general kit from a hardware store do?
  2. A

    Aero wing bolt holes

    Hey guys. I just bought an aero wing, which my car didn't come with from the factory, but I noticed the boot has three holes stamped which look like they would be for the wing? All the boots would've had that I assume. Is this where it bolts on? I'm deleting the middle pillar, so I'm not worried...
  3. K

    6-speed gearbox replacement

    Can someone please tell me if the 350z CD009 gearbox will bolt straight on without any mod? Thanks
  4. K

    Stock s15 exhaust

    Hey guys, might be a silly question but i have a stock s15 atm, just wondering if i will be able to take the stock cat back exhaust off and fit a bolt on 3" straight to the stock cat? just wanna know before i buy! Cheers
  5. K

    S15 exhaust

    Hey guys, ive just bought a completely stock 15 and im looking to chuck an exhaust on it, This may seem like a stupid question but if i buy a 3" bolt on cat back will it bolt straight onto the stock cat? Just dont wanna buy the exhaust if it wont, Cheers [emoji1417] Sent from my iPhone using...
  6. I

    Part number request

    Can someone please give me part numbers, even better a way to download fast? S15 spec R 1999 manual 32mm Drive shaft nut S13 handbrake anchor bolt, hex nut, washer Pair needed, not sure if they are the same both sides
  7. FreakensNL

    Detonation Cans

    He fellow S-owners, I'm busy getting a good Knock-Detection-System, building this: http://www.enginebasics.com/EFI%20Tuning/Det%20Cans.html Earmuffs with a air hose attached to the blok. Seems simple, and simple solution are the best! :D Anyone tried this on a SR20DET? any good results...
  8. S

    FS: XXR 527 alloys 114.3x5

    3 in perfect condition and 1 has slight chip (see pic) they have been refurbished. all tyres are legal with good thread 235/40/18 and 225/40/18 £500 also have i pair of 25mm bolt on spacers £100
  9. J

    WTB: Rear seat belts

    Just need the short parts that bolt to the floor that the belts clip into
  10. I

    FS: S15r OEM suspension, OEM rear arm set, S14/S15 rear eccentric lockout bolt set

    S15 spec R stock suspension. Good working order £30 collected or £60 delivered. Nice clean S15 spec R rear upper arm set. £20 collected or £40 delivered. Bolt set not included, little freckles are just under seal overspray. S14/S15 'baller bolt' rear bolt set with eccentric lockout, these...
  11. K

    WTB: 2-way diff

    Looking for a 2-way diff either 4.11 or 4.3 ratio.. I don't mind if it's 5 or 6 bolt shafts.. it needs to be abs casing. Cash waiting cheers kev
  12. C

    WTB: Couple of interior screws

    These have kindly been lost for me while my car has been worked on, hoping someone has some spares laying around? The ones highlighted there, I need 1 of each. Also I need one front seat mounting bolt. Thanks..
  13. S

    S15 Badges

    Hey just curious. I own an s15 nzdm version, so the badge on the hood/bonnet says 'Nissan' I'm looking to change it to the JDM badge 'Lighting Bolt' will it be possible to do so? Im not sure whether the lighting bolt badge will fit onto the hood/bonnet as the nissan badge is much larger than the...
  14. N

    Mocal oil sandwich plate center bolt size??

    I'm missing the center bolt from the thermostatic sandwich plate can anyone tell me what size ect or where I can buy one? S15 sr20det obviously
  15. Jordan

    FS: Magnetic drain bolt Project Mu. Gives +1000HP!

    This genuine Project Mu magnetic drain bolt is awesome and gives you an extra 1000BHP when fitted! Yours for only £15 Delivered. Size = M12 x P1.25 *DISCLAIMER Does not give you any BHP gains whatsoever, but cats do enjoy looking at Project Mu bling when sat underneath your car and are...
  16. Parky

    FS: Nismo GT LSD 1.5 way diff for sale

    I have one of these bad boys for sale - http://www.nismo.co.jp/en/products/competition/lsd/gt_lsd.html 4.083 ratio, comes in casing for S-bodies, with ABS / Speedo sensor, 6 bolt flanges, and I'll throw in matching driveshafts from my S15 for free if needed. £550 including postage, no offers.
  17. NICKO

    WTB: **Needed urgent, rear camber arm to knuckle nut and bolt

    Needed urgently to get the car back on the road, the nut and bolt that secures the rear camber arm to the knuckle, either for local pickup or if someone can post asap next day delivery :-)
  18. S15AK

    Body panel plastic bolt (holds bumper to wing)

    Hi Guys Not sure how to explain it, but is the plastic bolt that slots into the front part of the wing and is what holds the corner of the bumper on. Pic below. The tread is knackered (screw fell out) so need a new one but haven't a clue where to get one. Would Nissan be a good start, or are...
  19. Parky

    R33 Diff upgrade..?

    Evening all, Besides the diff itself, what else is needed to bolt an R33 diff on? Do I need full R33 driveshafts for the 5 bolt flange fitment or can I use the S15 shafts / stubs. I recall reading that I'd need R33 stubs, shafts and some hub parts as the shaft length and splines are...
  20. dave_t

    WTB: 15mm BOLT ON SPACERS

    After a pair of 15mm bolt on spacers OR SLIP ON spacers actually, as i do have some extended studs i could fit. They are for the front on the S15 as my 10j's are fouling the coilovers. hit me a pm if you have some -David
Top