What's new

Woo Hoo more new bit's

Joined
14 November 2005
Messages
664
Reaction score
0
Points
0
Location
black country
Website
www.coordsport.com
Thought i'd show you what i had delivered today :D



I went for the Apex type 1 in the end, big thanks to Apex for a great fast service :thumbs:



And a BIG BIG thanks to coordsport who did me a great deal on a HKS EVC 5 ltd edition black, HKS rad cap & HKS oil cap,
Thanks Gav :notworthy:

My techy friend is fitting my goodies in a couple of weeks time :D
 
D

Derek

Guest
Good Stuff Kimi, I was wondering was i the only one wasting money on there car at moment. You'll be over the moon when Fmic is fitted. I put mine on last week and can't stop looking at it over last few days. :thumbs:
 
Joined
14 November 2005
Messages
664
Reaction score
0
Points
0
Location
black country
Website
www.coordsport.com
Nicely said:
Why did you get the Type 1? They're a right bugger to fit....
:rant: :rant: :rant: yes i know i've read the fitting instruction's :eek: :rotfl: :rotfl:



i've e-mailed the instructions over to my techy mate, he said no problem :thumbs:



Nicely on a more serious note if you have any tips on fitting it send them my way :D
 

Nicely

Moving on...
Founder of S15OC
Joined
26 October 2005
Messages
8,000
Reaction score
2
Points
38
Location
Helsinki, Finland
Website
www.jull.net
Country
Make sure you've got a good hole drill and lube oil.

The battery tray drilling diagram is an S15 tray, not an S14 :D

An angle grinder is good for the chassis rails, but a hammer works too :D

You WILL need a dremmell to trim your bumper neatly.

Mikalor clips should be tightened FT.

The bumper support will need its rear corners filing.

Paint your washer bottle black while the bumper's off :nod:
 
L

Lee75

Guest
I'm going to have to invest in one of those fmic :nod: and paint my washer bottle black :rolleyes: :D
 
Joined
8 May 2006
Messages
874
Reaction score
0
Points
0
Location
Dublin , Ireland
Country
i Got my Fmic fitting a couple of weeks ago too. looks alot nicer and makes the car very torquie too...

i fitted it my self... there's alot of cutting.... and i also drilled the hole about a inch off centre . had to make it a oval to fit...
but hey its weight saving ... as i like to think of it..

should of seen the amount of srews left over.. :eek: just hope i got them all back in the right place

 
D

Derek

Guest
I fitted my fmic last week also. Make sure to put a bit of paint or primer on where u cut or drill or mr rust will eat through. I was torturing through Jap instructions.
 

Yakozan

Sweedish Chef
🔥 Contributing Member 🔥
Joined
14 November 2005
Messages
3,447
Reaction score
0
Points
0
Age
40
Location
Stockholm, Sweden
Website
www.s15oc.com
Country
Derek said:
I fitted my fmic last week also. Make sure to put a bit of paint or primer on where u cut or drill or mr rust will eat through. I was torturing through Jap instructions.
:thumbs:

Don't forget the paint. And don't use any paint with silicone in it.
 
J

Jono

Guest
O..... K...... What's up with getting the Type 2 then? Apex Performance website says "No Drilling/Cutting" etc. Am I missing a trick here? :confused:
 

Yakozan

Sweedish Chef
🔥 Contributing Member 🔥
Joined
14 November 2005
Messages
3,447
Reaction score
0
Points
0
Age
40
Location
Stockholm, Sweden
Website
www.s15oc.com
Country
Jono said:
O..... K...... What's up with getting the Type 2 then? Apex Performance website says "No Drilling/Cutting" etc. Am I missing a trick here? :confused:
The piping is different on the type 2.
It's way longer and should add some lag.
But it's easier to fit :)
 
Top