What's new

FS: 2002 Nissan 200SX S15 (230KW+)

G

ghosty

Guest
2002 Nissan 200SX S15 [ADM]
Odometer: 230,000km's (dash cluster reading, not engine!)
Seating Capacity: 2
Mod Plate/Engineered: LK1, LA3, LA8
- 2 seater
- Fixed back seat
- Turbo system with front mount intercooler
- 7 Point Rollcage with Braces
- battery relocate to boot (no code per-se but mentioned on the engineers certifcate)

Engine
SR20DET (compression tested: 150psi across all 4)
226RWKW (303HP) (360nm) @ 16psi <-- injectors maxed out, will be changing to nismo 740cc's running more boost, should see at least 250rwkw
Garret 3071R T2 .63 rear housing, s15 comp cover
HKS 256/272 Cams, 11.5mm lift, retain VCT
Earls Braided Turbo and Water Lines with inline oil filter
Z32 Air Flow Meter
Sard 550cc injectors with Sard Collars
Splitfire Coilpacks
Walbro GSS342 Fuel Pump
GFB Manual boost controller
GKTech Rocker Arm Stoppers
Koyo twin-core copper radiator
PowerFC with hand controller
Front Mount Intercooler
Stainless Steel Intake Pipe
Stainless Steel Intercooler Piping
Stainless Steel Exhaust Manifold
Stainless Steel 3" Dump Pipe
Stainless Steel 3" Front Pipe
Stainless Steel 3" Catback Exhaust with HiFlow Cat
Stainless Steel 3" Twin Pipes
Battery relocation to the boot with fuse and in-cabin isolation switch
Fullriver HC28 Dry Cell Battery (410CCA) (10.7kg)
Neodymium (Rare Earth) Magnets on the oil filter and sump

Drivetrain
Exedy Hyper Single Clutch rebuilt by Jim Berry with 4 puk Carbonic Button, solid center and 3600lb pressure plate
6 speed manual
Tomei 2-way diff (4.1)
Extended diff sump cover
5 bolt drive shafts
Reinforced rear cradle

Suspension/Handling/Steering
NISMO Engine Mounts
NISMO Gearbox Mount
Driftworks CS7 Coilovers (8/6kg)
Section Silkroad Camber Arms
Cusco Toe Arms
Cusco Strut Brace
D1 Caster Arms
New Tie Rods and Rack Ends
KKR Tie Rod Ends
KKR Extra Lock Spacers
C's alloy subframe bushes

Brakes
Standard, QFM Brake Pads

Wheels/Tyre
18x9" +9 Work VS-KF's [R Disk] (82mm dish) with Federal 595 215/40/18
18x9.5" +14 Work VS-KF's [O Disk] (107mm dish) with Federal 595 225/40/18

Interior
Velo GP-90 seat on Bride Lowmax rail
R33 GTR Series III passenger seat
Cusco Safety 21 7 point Rollcage with braces
Apexi Rev Speed Meter
Apexi PowerFC Hand Controller
AutoMeter Pro-Comp Boost Gauge
Battery Isolation Switch
Fire Extinguisher
Central Locking
Double Din 7" Touch Screen DVD/*everything* player with reverse Reversing Camera
Sony 6" speakers
InCar Camera Mount

Chassis
Resprayed factory colour
Custom metal widebody guards all round
Blitz ADR approved fibreglass vented bonnet (not on car yet)
All paint and panel done by Cameron's Bodyworks

Dyno Sheets




Pics










 
Last edited:
G

ghosty

Guest













Price: $25,000.00 as is above + some oem parts and spare (muffled) exhaust, or, $20,000.00 without the wheels/tyres.
Located: Brisbane
Contact: Michael - 0413504084
Buying process: Buyer to pay non-refundable $700 deposit and allow a week for me to get RWC and remove personalised plates. Full payment to be made by bank cheque. Registration to be transferred after bank cheque has been deposited and money is in my account; buyer + me go to bank, deposit cheque, then go to Queensland Transport and change rego over.
 
Top