What's new

my new car: 2001 s15

U

UK-Rushy

Guest
hya everyone. my names sam (rushy) i live in perth australia and used to own a nissan 180sx with a few mods an iv just upgraded to a 2001 s15 an i love it. anyway heres the specs an pics. i look forward to all of your comments :)

Engine:

Garret GT3082r turbo with .63 exhaust housing
Full strengthed exhaust manifold ( ceramic coated in and out)
Tial 44mm gate with screamer
3" Stainless Steel turbo back exhaust with de-cat
Hybrid FMIC
Tomei poncams
Tomei RAS
Cusco oil catch can
Nismo 740cc injectors
Sard fuel pressure regulator
Z32 Fuel filter
Walbro Fuel Pump
Apexi Power Fc D-jetro
Greddy Profec B electronic boost controller

Suspension/Brakes/driveline:

Tein Ha Fully adjustable Coilovers
Cusco Front Castor arms
Cusco Carbon fiber Strut brace
R33 Series 2 rb25det gearbox
Exedy 5 puck clutch
helical diff with 4.11 with ABS
front slotted rotors
Rear Kazama adjustable camber arms

Exterior:

M-Sport front bumper
D-max side skirts
Vertex Rear bumper
19" Koya R1 lightweight rims
x-force rear muffler
Interior/Stereo:

Alpine Dvd player

hertz front Component system 125RMS(speaker made in italy)
Hertz rear coaxial speakers 110RMS
Rockford fosgate 4 channel amp (110RMS x 4 at 4 ohms)
Digital design 1500RMS mono block amp
Kicker 15" solobaric subwoofer in sealed box
Apexi EL2 electronic Boost and exhaust temp gauages with control box
Top of the range alarm

Power: 360hp @ 1.2bar

my plans are:

change the wheels
fix airbag light problem
do something to the engine (head gasket, valve springs, maybe even a rebuild but depends on $$)
also want to get an aero front bar but there so hard to come by!

pics:



 

meddler

It's not easy being a green text speak nazi
Staff member
Moderator
Joined
17 October 2007
Messages
3,085
Reaction score
0
Points
36
Location
Australia
Country
very nice. welcome.
 
U

UK-Rushy

Guest
Cheers for the replies :) havnt done much to her lately baught a turbo by Garrett blanket an showed an increase of 100 degrees on egt gauge so thats good an also thinking about buying some nismo lmgt4 wheels but not sure if theyl fit il keep it updated
 
Joined
21 July 2008
Messages
527
Reaction score
0
Points
0
Location
Essex/London
mmmm LMGT4's :smitten::smitten:


The engine bay looks tidy, one of craigs carbon cooling panels would really finish it off.


Do you have any dyno graphs for it?
Do you know whats stopping you getting more power i thought the gt30xx series of turbos were good for 400+
 
T

teezn_180sx

Guest
yeh the turbo shud be gud for that power but u gotta get in and do the bottom end..... let me rephrase.... u will have to get in and do the bottom end... if u run that sorta power thru a stock block.... nice power figure tho.... much like my ride but im yet to get the cams in there.

looks the guds too champ!
 
U

UK-Rushy

Guest
mmmm LMGT4's :smitten::smitten:


The engine bay looks tidy, one of craigs carbon cooling panels would really finish it off.


Do you have any dyno graphs for it?
Do you know whats stopping you getting more power i thought the gt30xx series of turbos were good for 400+
I know I want em so bad ther black aswell mmmm

Cheers :) Where can I get a cooling panel from? Do they fit ok with the m sports front bar?

Yeh I can post the graph up if u want. It made 360hp at 1.2bar but as teezn said I'd have to get internal work done which I'd lve to do but due to low funds and it been my daily i dont wanna go too far yet :)
 
U

UK-Rushy

Guest
tadahhh New wheels woooo




The mesh bits are still waiting to go back in because i've sprayed them black but I'm undecided weather to put them back on or not. What do you guys reckon?
 
Last edited by a moderator:

meddler

It's not easy being a green text speak nazi
Staff member
Moderator
Joined
17 October 2007
Messages
3,085
Reaction score
0
Points
36
Location
Australia
Country
looks good. I would put the mesh back in though, otherwise the front doesn't look complete.
 
Joined
23 July 2010
Messages
877
Reaction score
0
Points
0
Location
SW London
Totally agrre there. I hate the look of pipework showing behind the front bumper. Fit the mesh and make it look more sleek and refined.
 

craig8585

I'm so cool, I have my own fan thread :p
🔥 Contributing Member 🔥
Joined
16 November 2007
Messages
4,118
Reaction score
0
Points
0
Location
Lichfield, UK
Country
Mixture of opinion here I see! I prefer mesh in the side vents myself. Don't listen to us though, your the one who looks at it most! :)
 
U

UK-Rushy

Guest
havent updated this in a while! not much has gone on really, got a new koyo radiator, put the car on the dyno and made 330rwhp @1.2bar, then while working on my car i found a decent sized hole on the pipe going from turbo to intercooler, got this welded up and thrown on the dyno again and its a completely different car! made 340rwhp @ 1.2bar and boost/power comes on alot earlier, had to stop due to stock coilpacks not holding, splitfires have been ordered and it will be back on the dyno again!

also got a new front bar


 

Larsz

Joined
9 September 2008
Messages
149
Reaction score
0
Points
16
Location
Netherlands
Country
Looks very nice! Loving the wheels. Do you have an interiour picture, especialy of the shifter, im curious as how the RB25 box fits.. As my box is probably gonna die soon, im thinking of other options.
 
U

UK-Rushy

Guest
Thanks for the replies!

Yeh sure il take a pic tomorrow and post it up
 
U

UK-Rushy

Guest
Haven't updated this in a long time! Trying to rememer what's changed!

Most obvious would be this:






Gt3076 twin scroll .82, powertune twin scroll manifold, 2x tial 38mm wastegates with screamers and 9x4inch pod filter :p

Also got white line front and rear adjustable sway bars

Few random pics:


 
Top