What's new

~ g h x s t s 1 5 ~

Joined
14 July 2015
Messages
23
Reaction score
0
Points
1
Location
/ M I D L A N D S /
Country
Instagram
@stew7n
With my hubs and subframe back from the coaters, in a ghostly white finish, it was time to crack on fitting them and other parts I had gradually amassed since late last year.




GHXST drop knuckles and modified subframe.





DW front lower arms and Hardrace engine mounts.




Tein rods and spacers with rod fresh ends/boots, not pictured, too.



SuperPro steering rack bushings to replace the saggy old units.


I already had the old subframe dropped out and engine held with a support beam, so the fitting was fairly straight forward. Accessing the nuts on the engine mounts was the most difficult part, but a UJ and 4 wobble extensions eventually sufficed.








I wasn't able to complete both sides as I run into some difficulties, however I'm confident these can be resolved nice and quick, so I can finish up the front end and drop the car onto its wheels for the first time in months!



I was still very happy with the progress I made through :)
 
Top