What's new

Wheel fitment

Joined
6 June 2010
Messages
177
Reaction score
0
Points
0
Location
Midlands
Can anyone tell me if these wheels will fit my s15 spec r please!

Work emotion cr Kai

17/8 et +42 fronts
17/9 et +44 rears

Hub centres 73.3 mm

Thanks
 
Joined
2 August 2008
Messages
193
Reaction score
0
Points
0
Location
Finland, Nokia
Website
www.dnsf.org
Country
I can upload pics for you after I get home from work. I had Cr Kais in bronze and same specs as above...

I can say that with those specs, wheels are deep in the arches. But let the pictures speaks later :)
 

craig8585

I'm so cool, I have my own fan thread :p
🔥 Contributing Member 🔥
Joined
16 November 2007
Messages
4,118
Reaction score
0
Points
0
Location
Lichfield, UK
Country
You'll probably need 25mm spacers or similar F+R
 

Trial_S15

Joined
13 July 2008
Messages
1,355
Reaction score
1
Points
38
Location
Meath, Ireland
Website
www.modifiedmotors.ie
Country
I was thinking the same. I had the same wheel sizes with ET32 fronts & ET30 rears and I had very little space to the front coilovers (less than 2-4mm) but had about 10-15mm going spare at the rear.... The DW CS2's are meant to give better than standard clearance for wheels too over other coilovers as they are inversly mounted....

I did have the stretch the tyres a bit though to get them to fit under the standard arches...

Edit;

Spec S S15
Spacers: none
Suspension: Driftworks CS2's
Comments: standard arches

Wheels: Work CR Kai
Size: 17x8JJ ET 32 Front and 17x9JJ Rears ET 30
Tyres: Hankook Ventus 215/45r17 front and 225/45r17 rear



Did you check out the Wheel fitment guide?
http://forum.s15oc.com/showthread.php?556-Ultimate-wheel-fitting-guide/page28
 
Last edited:
Top