What's new

Spigot Bush problems

I

Ican

Guest
Does anyone know if the S15 bush is different to S14?

I have been struggling to get my S15 box back in it won't go into the S14 spigot bush I used. They appear to be the same but it's just not having it. :confused:
 
I

Ican

Guest
Also does it sit flush or is it supposed to be recessed inside the flywheel a little?
 
Joined
28 July 2009
Messages
563
Reaction score
0
Points
0
Location
Hertfordshire
The S14 and S15 spigot bush are exactly the same, but they are installed into different locations. In the S14, the spigot bush is installed into the end of the crank, and the S15 in the flywheel as you have done.

It's not meant to sit flush in the flywheel, there should be a small collar around the outside that rises it out slightly. The collar end is installed facing the clutch.
 
I

Ican

Guest
It's not meant to sit flush in the flywheel, there should be a small collar around the outside that rises it out slightly. The collar end is installed facing the clutch.
Ah that might be why it didn't go in then I may have pushed it in to far. :wack:

Cheers thanks for the help. :thumbs:
 
Top