What's new

Fitting an z32 A/F Meter

T

Toby

Guest
Hi All, had a search but im getting mixed results...

I'm buying one of these with a polug fitted, so hoping the wiring will be a plug and play affair.

However, Is it true the elephant trunk will not be large enough and need replacing? if so whats the best option?

Also will I need a new adapter plate with the air filter?

Many thanks!
 

craig8585

I'm so cool, I have my own fan thread :p
🔥 Contributing Member 🔥
Joined
16 November 2007
Messages
4,118
Reaction score
0
Points
0
Location
Lichfield, UK
Country
What air filter have you got? I've read that the Apexi ones bolt straight onto the AFM with the bolts and gasket supplied in the replacement filter kit. Not sure about the trunk though.
 
T

Toby

Guest
Current Airfilter looks like an Ebay special and a bit tacky so I font mind replacing it if it doesn't fit.

Its got a ncie adapater that mounts onto the current A/F meter perfectly though..
 
Joined
19 June 2007
Messages
1,192
Reaction score
0
Points
0
Location
Essex / UK
Country
The Apexi filter filter should bolt straight onto the Z32 without the need of an adapter, however you may have problems getting the OEM trunk to fit as the Z32 is quite a bit bigger. I have heard people getting it to fit by putting the end of the trunk in boiling water so it can expand and be stretched on ?!

Personally ive got one of these...

http://www.apexperformance.co.uk/ca...13&PHPSESSID=b95cbd303bad007d0942a4b15467135f
 

craig8585

I'm so cool, I have my own fan thread :p
🔥 Contributing Member 🔥
Joined
16 November 2007
Messages
4,118
Reaction score
0
Points
0
Location
Lichfield, UK
Country
Top