What's new

glovebox removal

Joined
5 January 2006
Messages
288
Reaction score
0
Points
0
Location
NZ
Ok, who from that show "the Krypton Factor" designed the glovebox mounting method? The usual squezze the sides together and pull method doesn't work. Looking underneath, I can't see any screws holding it in place that are accessible. I see there are two plastic clips, but before I force them (and probably break them), does anyone know the correct method?
 

Yakozan

Sweedish Chef
🔥 Contributing Member 🔥
Joined
14 November 2005
Messages
3,447
Reaction score
0
Points
0
Age
40
Location
Stockholm, Sweden
Website
www.s15oc.com
Country
I used brute force on the black pins :)
You might wanna try getting a flatheaded screwdriver in there. Might be easier. :)
 
Joined
5 January 2006
Messages
288
Reaction score
0
Points
0
Location
NZ
thanks guys. My glovebox seems to rattle on the hinges. I'm hoping there is something behind there to tighten, otherwise it might just be play on those clips. The hours I've spent preventing rattles! :cry:
 
Top