Wheel fitting problem.

[Day_Dreamer]

I am trying to buy a set of 18 inch 9.5J +35 wheels for my S15, just bit worry that will the front wheels get contact with suspension without adapter?

 

[DOM]

you running coilovers or oem suspension?

there should be a wheel fitting thread on this site somewhere which will give you an idea of what has been doen before.

 

[Hunts15]

it has been done you may need to roll the arches or fit spacers but they will fit
im putting 9.5 on the front and rear and thats what iv been assured

 

[Day_Dreamer]

hmmm....i am running coilovers, but how can i roll the front arches? or il have to replace with aftermarket front wide fenders?

 

[JEZ 8553]

You will need a lower offset if using 9.5" wide wheels on the front. Then you will need wider fenders or run a ridiculous camber as they will stick out quite a lot. Most people just about fit 8.5" on the front with standard fenders and keeping the wheels in line with the arches.

 

[WATDA]

35 offset will hit the suspension.Would need a 10-15mm spacer. What wheels ya looking at getting bro?

 

[Day_Dreamer]

Volk Racing CE28Ns, but sadly need to get rid of my regamasters first.