Fuel Pump Install

[superbike81]

Getting ready to install a Walbro 255 fuel pump. Was looking at the fuel pump cover last night in the car and there are wiring connectors going into the top. Which one will I splice the fuel pump wiring into? Why are there two connectors? I'm not used to seeing this, every other car I've done a fuel pump on has just had one.

Thanks for the help!

 

[DeanS15]

if you're fitting a walbro pump then dont worry there is no splicing to be done. the standard plug on the original pump plugs into the walbro without any modding.

 

[Nicely]

May I suggest you read the guide on my site before doing anything? Most of those connections on the top are fuel lines.... A Walbro is nearly entirely plug and play on the S15 (its not on the S14).

 

[subzero]

May I suggest you read the guide on my site before doing anything? Most of those connections on the top are fuel lines.... A Walbro is nearly entirely plug and play on the S15 (its not on the S14).

link ??

is an ebay jobies safe enough to buy ??

http://cgi.ebay.com/ebaymotors/95-9...m14QQhashZitem250298923284QQitemZ250298923284

 

[Nicely]

In my signature...

 

[subzero]

ah was on you page and only went through your s15 guide. very very helpful page that .

so stick with your existing fuel filter if its in good nick ? and is a fuel regulator needed with fitting this ??

 

[Nicely]

Nope.

I don't really agree with FPRs. If you need more fuel, fit bigger injectors

 

[subzero]

so just the pump is all i really need as my motor i reckon is unmollested except for a metal head.

thanks buddy.