What's new

Hardware advice

Joined
29 July 2018
Messages
4
Reaction score
0
Points
0
Location
County Durham U.K.
Country
Just picked my s15 up from the docks and the bumpers have been removed due to ride height but no hardware was kept just wondering what I need to fit bumpers front and rear
 

Joeh

Staff member
Moderator
Joined
12 December 2006
Messages
771
Reaction score
65
Points
28
Location
London
Website
www.silivaoc.com
Country
Instagram
@silviaownersclub
It might just be bolts, usually the bumper brackets are bolted to the front wings and rear body, do you have any photos of what’s on the car now?
 

DeanS15

My car is so clean you could eat off it.
Joined
16 March 2008
Messages
2,977
Reaction score
4
Points
38
Location
sheppey, kent
Country
As far as I can remember the bumpers are just held on with 6 or 8mm push clips along the tops and in the arch liners and some m6 bolts/ tapping screws inside the wheel wells. Maybe some m8 in there somewhere but nothing that's hard to get hold of from pretty much anywhere. Some penny washers won't hurt either.
 
Top