Do you have a Nissan part number for the one you think you should have? I work at Nissan and we’ve some blank keys in a box that are for older models so may be one in there I could get you.
Sent from my iPhone using Tapatalk
I don’t know what the part number is, no, but I have found this one from Australia which from what I can tell is identical to mine and *says* it will work with the R34/S15.
If it helps, it measures approx. 8.5mm wide by 44mm long. I don’t have any verniers at home so I can’t measure the other bits accurately.
This is my key:
So they cant cut it ? I know a blank or spare is different to the original but if its a proper blank it should be able to be cut
No, they can’t. Apparently the S15 key is a 10-point key whereas most keys (including the blank I bought) are an 8-point. You can cut a 10-point down to an 8-point but not the other way round. He had a load of old key blanks and he checked most of the ones which looked similar and none were right or could be made right. Most of the keys also had a shoulder which the original S15 one doesn’t.
I went to another place and he did and said the same and I also tried Timpsons (a franchised key cutter/shoe fixing place) and he wouldn’t touch it. He was adamant it had an immobiliser in it despite me telling him multiple times it didn’t and why, so he put it in his magic machine which tells him if it has one and to his utter shock horror it didn’t, so he assumed something fishy was going on and refused to do anything more.