What's new

oil cooler/filter relocation

Joined
2 February 2012
Messages
339
Reaction score
0
Points
0
Location
midlands
Country
since uppjng the power would like to get one of these next to keep temps under control? question is car came with defi oil pressure and oil temp gauges so what kit comes with a sandwich plate that takes these sensors and fits the engine block :confused:
 
Joined
9 September 2009
Messages
1,864
Reaction score
0
Points
0
Location
New Zealand
Country
if the thread on the sensor is 1/8th NPT then any hole on an adapter block that is 1/8th NPT which 90% of them are that thead, it will fit easy as (dont confuse 1/8th NPT with 1/8th BSP), or you may find that your defi setup is not a stand alone sensor per gauge and simply taps into your ECU's harness and uses the factory sensors.
To fully understand i suggest you research SR oil adaption blocks/lines/coolers there is a huge amount of talk about this all over the SR forums world wide
 
Joined
2 February 2012
Messages
339
Reaction score
0
Points
0
Location
midlands
Country
thanks for the info Spoonman will have to check to see if there is a sandwich plate and sensors behind the filter thanks again :thumbs:
 
Top