What's new

Boost issues

Joined
2 September 2012
Messages
180
Reaction score
0
Points
0
Location
Norwich
Country
Was out today and noticed I'm hitting 1.73 bar if boost. It's shpuld only be hitting 1.3 bar in low.
Can't see any pipes hanging off anywhere, no smoke either.

Any suggestions?
 
Joined
9 September 2009
Messages
1,864
Reaction score
0
Points
0
Location
New Zealand
Country
got another boost gauge to you could fit just to see if your current one is faulty, put a small and slow amount of compressed air into the actuator so see if the arm is moving, or if you have a external do the same thing to to see if the valve is moving
 
Joined
2 September 2012
Messages
180
Reaction score
0
Points
0
Location
Norwich
Country
It's reading 1.53 on PFC and boost gauge. Hitting 1.73 on the AVCR! Will have to run it to APT soon.

Other than that its running fine at lower revs.
 
Joined
2 September 2012
Messages
180
Reaction score
0
Points
0
Location
Norwich
Country
Sorted. Actuator pipe had split.
Fixed within 5 mins
 
Top