What's new

chip and remapp

Joined
14 November 2005
Messages
664
Reaction score
0
Points
0
Location
black country
Website
www.coordsport.com
i've just got back from having my car fitted with a new chip and remapped :D
i had it done by jez [ horsham developments ]
:notworthy: to jez hes a top bloke.

car feels so much smoother and got loads more pull.

i recomend you go see him if you thinking of having anything done.


kimi x
 
Joined
1 June 2006
Messages
1,254
Reaction score
0
Points
0
Age
40
Location
Kettering
heard alot about this bloke "jez" and he's not to far from me... so once the FMIC and boost controller is on the car...

a trip down to him could be the route i take!

get it mapped properly for UK fuel! :D
 
Joined
14 November 2005
Messages
664
Reaction score
0
Points
0
Location
black country
Website
www.coordsport.com
Dazz0i said:
heard alot about this bloke "jez" and he's not to far from me... so once the FMIC and boost controller is on the car...

a trip down to him could be the route i take!

get it mapped properly for UK fuel! :D

Yeah i havent got the boost controller or FMIC on yet but hes tuned it ready for them,
i've gotta pop back down to him when they are on and he'll check everythings ok for me.

go see him hes good :thumbs:
 
Joined
1 June 2006
Messages
1,254
Reaction score
0
Points
0
Age
40
Location
Kettering
cool, nice to know.... the best publicitiy is positive word of mouth! :D

thought his prices were reasonable too! :)
 
H

Hank S15

Guest
We need stages for the S15!

Make copy`s of that chip for all of us!
(offcourse copy`s bought trough Jez)
 

Nicely

Moving on...
Founder of S15OC
Joined
26 October 2005
Messages
8,000
Reaction score
2
Points
38
Location
Helsinki, Finland
Website
www.jull.net
Country
Jez only does custom mapping for S15s, due to numbers and mod variations.. He has stage chips for the S14, S14a and S13.
 

Yakozan

Sweedish Chef
🔥 Contributing Member 🔥
Joined
14 November 2005
Messages
3,447
Reaction score
0
Points
0
Age
40
Location
Stockholm, Sweden
Website
www.s15oc.com
Country
Nicely said:
Jez only does custom mapping for S15s, due to numbers and mod variations.. He has stage chips for the S14, S14a and S13.
He should consider doing a chip for full exhaust, FMIC and air filter as that's probobly the first point when the S15 needs a remap to gain more effect.

Should be a quite few people on here who would be interested. :)
 
Joined
1 June 2006
Messages
1,254
Reaction score
0
Points
0
Age
40
Location
Kettering
i think for the cost of it to be live mapped though, i wouldn't bother with a "generic" chip...
 

Nicely

Moving on...
Founder of S15OC
Joined
26 October 2005
Messages
8,000
Reaction score
2
Points
38
Location
Helsinki, Finland
Website
www.jull.net
Country
Now, you see, if you lived in Scotland, Sweden, Oz or NZ rather than Kettering, you probably wouldn't take that view... Newbury is a long way from those locations :nod:
 

Topper

Flying Scotsman
Joined
14 November 2005
Messages
4,312
Reaction score
0
Points
0
Location
Scotland
Website
www.s15oc.com
Country
Agreed, we would sooner make our cars to match the relevant ship :nod: - Which is why Jez make so much money :D
 
Joined
1 June 2006
Messages
1,254
Reaction score
0
Points
0
Age
40
Location
Kettering
true.... but surely a custom mapped chip from someone else, at a nearer location would be a better idea than a generic chip?

obviously i'm not knocking anyones work here... and if this is what they want etc....

but i've always been "advised" to steer from generic chips.

i was going to do a 130mile trip to get the hondata remapped at TDI north.
 

Topper

Flying Scotsman
Joined
14 November 2005
Messages
4,312
Reaction score
0
Points
0
Location
Scotland
Website
www.s15oc.com
Country
Your prob right, but there are no generic schips for the S15, so we cant have this debate..... yet :)

There are a few people local to me who could do the mapping, but only 1 i would trust, but i dont know of his skill level and dont know anyone who has had a car mapped by him :no: - Jez has a proven record.
 

Yakozan

Sweedish Chef
🔥 Contributing Member 🔥
Joined
14 November 2005
Messages
3,447
Reaction score
0
Points
0
Age
40
Location
Stockholm, Sweden
Website
www.s15oc.com
Country
Of course I could have the car remapped over here.
But then I would have to get an ECU or piggyback. And the mapping cost would probobly be twice of the cost of a Jez chip.

I probobly will get a new ECU later if I start changing cams and turbo and stuff.
Intill then a generic chip will work fine.
I may get a couple of horsies less then a custom map, but I'm willing to sacrifice those :D
 

Nicely

Moving on...
Founder of S15OC
Joined
26 October 2005
Messages
8,000
Reaction score
2
Points
38
Location
Helsinki, Finland
Website
www.jull.net
Country
Dazz0i said:
true.... but surely a custom mapped chip from someone else, at a nearer location would be a better idea than a generic chip?
Custom mapping, yes. But custom mapped Jez chip can only be mapped by him. He developed the chips and the software to map them. I would be more inclined to trust a Stage 1 S15 chip from Jez than anyone else. But this is because I've been out on three mapping sessions with him and know how and what he does to achieve the mapping...
 
Joined
1 June 2006
Messages
1,254
Reaction score
0
Points
0
Age
40
Location
Kettering
like i say, not doubting his skills 1 bit.... proof is in the pudding etc!

obviously it's down to who and what you can get done locally, i'm just fortunate of where i'm located.

for topper, i'd say pay for a flight to scotland and have it done...... but obviously going further a field would mean more people would be needed in on the mapping session to make it worth while.

a bloke called mase from the US frequently makes trips to the UK to map honda's.... but a group of 5 cars is needed!
 
Top