will this offset fit S15...

[sushiming]

yeh i know that part thats why i will see how much the wheels go for

 

[sushiming]

what profile should 40 be ok??

 

[sushiming]

works matching for the rims
Nissan Silvia_______S15 5H-114.3 18?7.5JJ+35(ST) 　 225/40 18?8.5JJ+43(ST) 　 255/35
Mazda RX-8 type S SE3P 5H-114.3 18?8.5JJ+43(ST) 　 225/45 18?8.5JJ+43(ST) 　 225/45
[S15]
[Mazda RX8]
will it actually work??

Nicely what offset are ur rims?? I know they r 18x8.5+?

 

[Nicely]

My offset is 32.

 

[Topper]

Would a spacer not solve the problem??

 

[sushiming]

for me or nicely??
+43 would be ok for the rear but what about the front??

 

[Nicely]

Whose?

The front's the concern for me too...

 

[Topper]

for me or nicely??
+43 would be ok for the rear but what about the front??

I think you would need a spacer, but you may not.

[Newbie mode on] Why is the front a concern but not the rear?? [Newbie Mode off]

 

[sushiming]

as i dont understand how the offset work....
would +43 in the front be sticking in or out??

for the works +43 for the 18 is right but its ment to be +32 for the fronts
nicely urs should be oki iam guessing

 

[Topper]

as i dont understand how the offset work....
would +43 in the front be sticking in or out??

In,

my offset is +17 and they stick out :nod:

 

[sushiming]

o so if i want just stick a spacer in there if its too far in......then should be sorted?

 

[Nicely]

Its the 8.5 that's the important bit. That's the width. 8.5s on that list have a bigger offset.

Ming, be wary. If you stick more than a 3-5mm spacer on, you are probably going to need extended studs.

Topper, there are strut clearance and arch liner issues at the front, especially if you have coilovers. Backs are usually fine, except for wheel arches.

 

[Topper]

Topper, there are strut clearance and arch liner issues at the front, especially if you have coilovers. Backs are usually fine, except for wheel arches.

Ah that could explain why i have 9j's, coilovers and NO archlining.

So a safe offset and width would be 8j with +35 ish??

 

[sushiming]

iam confused now should i or should i not get them then?? ive only got shocks and springs.....

 

[Nicely]

Your guess is as good as mine. You'll probably manage to get them to fit somehow.

 

[sushiming]

ok then if they dont fit u can have them hehe

 

[Topper]

Dude like Nicely says, they will fit, just a question of how really - Just buy them, you know you want to :nod:

 

[sushiming]

i know i want them and i know u know i want them hehe

 

[kieran]

i have 8 x 18 front et35 and 2254018 and a 5mm spacer giving me a total offset of 40 and they now clear the coilover (they didnt before) but now i have is super low its rubbing on the arch linners on bump/ steering.

bloody thing drives me mad lol got 2553518 rear with et35 sits nice but had 3.5 degrees of neg camber if i straighten it out they will rub like bitch!


this months to do- get camber arms and do arch mods on rear remove arch liners front :thumbs:

 

[Topper]

this months to do- get camber arms and do arch mods on rear remove arch liners front :thumbs:

I have no arch lining front or rear and which i did