What's new

Greddy electronic gauge. Very stock looking.

Yakozan

Sweedish Chef
🔥 Contributing Member 🔥
Joined
14 November 2005
Messages
3,447
Reaction score
0
Points
0
Age
40
Location
Stockholm, Sweden
Website
www.s15oc.com
Country
Just found this on Greddy USAs website :)
This should be the closest gauge there is if going for the stock look.


No warning or peak hold though. But very close match to stock gauge.
 

Yakozan

Sweedish Chef
🔥 Contributing Member 🔥
Joined
14 November 2005
Messages
3,447
Reaction score
0
Points
0
Age
40
Location
Stockholm, Sweden
Website
www.s15oc.com
Country
Topper said:
Looks good :nod:

Do you need a control unit with those like you do with the Defi units?
Don't think so. They have no other fuctions beside measuring from the sender.
I don't think Greddy has any gauge which require a controll-box.
The warning series comes with a separate box for every gauge.
warning and peak functions are controlled from the front of the gauge itself.
 
Joined
13 November 2006
Messages
429
Reaction score
0
Points
0
Location
Swindon, UK
I've got the Greddy Data Link gauges. Exactly the same as above but with memory and warning light and they blend in perfectly with the stock look. I'll take some pics when i get the car back.
 

Yakozan

Sweedish Chef
🔥 Contributing Member 🔥
Joined
14 November 2005
Messages
3,447
Reaction score
0
Points
0
Age
40
Location
Stockholm, Sweden
Website
www.s15oc.com
Country
I've got the Greddy Data Link gauges. Exactly the same as above but with memory and warning light and they blend in perfectly with the stock look. I'll take some pics when i get the car back.
You mean the SM Integrate gauges?
Seems to be good units.

I've got the warning series ones.
 
Joined
13 November 2006
Messages
429
Reaction score
0
Points
0
Location
Swindon, UK
Not sure what series they are, but they react very quickly and it fits the turbo gauge pod perfectly :)
 

Nicely

Moving on...
Founder of S15OC
Joined
26 October 2005
Messages
8,000
Reaction score
2
Points
38
Location
Helsinki, Finland
Website
www.jull.net
Country
Just to warn you that if they fit the pod perfectly, they'll be too small for the vent, if you are planning using them. 60mm is good for the vents and will fit the pod if you shave the inside of the pod front (the thickness, not the visible edge).
 
E

evade

Guest
I have the 60mm greddy warning gauge with warning and peak functions..also it is a stand alone gauge..

comes with a map sensor you place in the engine, plug that into a vacuum source..

that leads to a little box..then one cable up to the gauge...no need for a seperate control box (defi style) or anything you buy it and it comes with everything you need.

cost about $250 AUD from nengun

its the grey one which lights up orange and matches (closely..its not as close as the pic suggests but it is pretty damn close..) the s15 dash.

i also have it fitted in a JDM a pillar.





 
Joined
13 November 2006
Messages
429
Reaction score
0
Points
0
Location
Swindon, UK
That's exactly how mine is mounted. Thought i was looking at my car then :)

Where did you take the light supply from? Cigarette lighter or somewhere else?
 
Top