S
Snake
Guest
2 quick questions if anybody knows the answer or has come across it. I recently purschsed a Blitz DSBC Spec S second hand, after receiving it i sat down and went through how to install it and what peices did what.
1st question the 4mm hard plastic hose connector, does anyone know how to remove the hose once it is connected, tired twisting, pulling cant figure it out and have spent 2 hours on the net looking for advice.
2nd question the 4mm vaccum line the one which connects the metal Tee and the CPU is way to short to make itself into the engnie bay. I also have a mechanical vaccum/boost gauge which is to be connected into the vaccum line from the throttle body to the stock BOV. The gauge is to be set in one the AC vents, i will be able tee into the boost gauge feed line in cabin. Has anybody done this, or had any problems in doing so.
Any help would be appreciated
1st question the 4mm hard plastic hose connector, does anyone know how to remove the hose once it is connected, tired twisting, pulling cant figure it out and have spent 2 hours on the net looking for advice.
2nd question the 4mm vaccum line the one which connects the metal Tee and the CPU is way to short to make itself into the engnie bay. I also have a mechanical vaccum/boost gauge which is to be connected into the vaccum line from the throttle body to the stock BOV. The gauge is to be set in one the AC vents, i will be able tee into the boost gauge feed line in cabin. Has anybody done this, or had any problems in doing so.
Any help would be appreciated