PDA

View Full Version : Injector Selector


Nicely
25-01-2006, 12:33
Calculate what size injectors you should be using for the power you're running.

http://www.rceng.com/technical.htm
S15R
25-01-2006, 12:55
nice found dude:D

I'll start saving for a set of 4 1500cc injecters :thumbs:
Nicely
25-01-2006, 13:14
Thanks goes to Meddy, who found it originally.

As it refers to crankshaft HP, I'm assuming that's the same as the fly figure. Makes it a bit difficult to work it out for you rwKW people.

According to the calculation, I should be running 640s and the stock JDM Spec R is already maxxed.
elizium
25-01-2006, 14:07
hopefully that's based on normal injectors and not the c*** that RC sell :P
Nicely
25-01-2006, 14:30
They say its industry standard.

Why do you say they're cr@p? :p
elizium
25-01-2006, 14:43
Why do you say they're cr@p? :p

bad experience on my Z and a number of other Zs with them... very inconsistent flow rates across a set.. :(

see post below

http://www.twinturbo.net/net/viewmsg.aspx?forum=general&msg_id=1679155&words=rc%3a%3aengineering and many more like that too :(
Topper
25-01-2006, 14:46
"System fuel pressure @ fuel rail", what should this figure be??
elizium
25-01-2006, 15:04
"System fuel pressure @ fuel rail", what should this figure be??

at idle it's about 35psi... but it will increase as boost pressure increases I think 40-43 would be a good number?